Satellite director

衛星 - 衛星導演取景器，衛星指針 - 盤指針-satfinder

Satellite Director is a tool to help you know all the things on the satellite to find satellite TV and satellite alignment use your pointer to see the augmented reality of the camera to see and target the dish search satellites in the sky

It has never been easier to tune your satellite dish!

Point your smartphone towards the sky and observe, in augmented reality, the geostationary satellites orbiting around the earth. You have access to a list of more than 200 satellites, with a search function to make your job easier.

Once you have selected a Satellite, you will see several useful information for the installation of your dish such as its geographical area, longitude, azimuth, elevation and polarization calculated from your coordinates.

. The result is displayed both as numerical and graphical data

The configuration of your satellite dish requires a lot of calculations and skills to know where the satellite is, to make sure that the installation frees you from the obstruction. Satellite dish helps you find and direct your antenna with a minimum of hassle.

Satellite Director (Satellite Finder) is a tool that will help you set up a satellite dish. It will give you azimuth, satellite director elevation and LNB tilt for your GPS based site and selected satellite list. The result is displayed as numerical and graphical data on google maps. He also built in the compass that will help you satellite director to find the appropriate satellite azimuth. He can also use augmented reality to show the director of the satellite where the satellite is on the camera.

Satellite Pointer Application is a tool that will help you set up a satellite dish. It will give you the azimuth, elevation and LNB tilt of your position according to the satellite selected in the list.

How it works?

Just turn on the GPS in the rental of your phone or GPS, select the desired satellite or satellite TV rental. You have found the satellite when the white ball is in the white circle and the cyan ball is in the cyan circle. Align, in azimuth, the satellite dish with the cyan arrow, the satellite dish is aligned with the satellite.

Selectable audio tone, camera preview, continuous mode (no pause), color selectors, or a satellite-defined position can help you find the desired satellite TV.

You can take a picture (resized) by pressing the direction tab. The photo / screenshot is stored ONLY on the phone's memory card.

How it works ? In 3 steps or screens:

1- Select the desired TV satellite

2- The GPS location of the satellite dish and the GPS location of a target (or reference point) are required. The target may be the GPS location of a house, tree, plant, etc. Simply turn on GPS in your phone or enter GPS coordinates using Google Earth / Maps (satellite dish position and visible target position).

To indicate how stable or good the values ​​are, they get a color. RED = not good or not stable, YELLOW = better but not good, GREEN = good or stable, CYAN = do not know. To receive good GPS signals, you should be "open". GPS signals can be blocked by buildings, trees, etc. and this will result in fake GPS locations with an error of several meters while accuracy is good.

3- Adjust the elevation of the dish and the inclination to the calculated values, see screen 3. The satellite pole must be in the vertical position. With the GPS positions set, hold the phone above the satellite dish and aim for the central arrow labeled "target" on the target. Then steer the satellite arm towards the arrow called 'satellite'. The success of satellite research depends on the accuracy of the phone's GPS and the stability of your hands. KEEP THE TELEPHONE PAID STABLE TO THE TARGET !!!

This application contains a set of instructions that will help you install on all the satellites of the world