Use APKPure App
Get RMU1ER Config old version APK for Android
برنامج التهيئة للMobiltex corTalk® RMU1ER عند استخدام مبرمج بلوتوث.
*** Requires a corTalk® RMU1PGM-BT and RMU1ER to use. ***
Contact us at '[email protected]' to purchase.
Old RMU1PGM programmers have a white cable, the new Bluetooth/USB programmers have a black cable.
This app is for configuring the corTalk® RMU1ER (Remote Monitoring Unit 1 Electrical Resistance) with the new RMU1 Bluetooth Programming cable. The cable functions as a complete RMU1ER programming interface but only requires the Bluetooth connection of your phone and a USB power source.
The RMU1ER is used to monitor an Electrical Resistance probe of almost any time (Tube, Wire, Cylinder, Flush, Spiral or Strip). This app allows access to diagnostic information on the RMU1 and allows setting up the configuration to meet the customer's needs.
The app allows full configuration of the RMU1 including
- probe type
- probe thickness
- limits
- slot scaling and offset
- location
Other features include the
- viewing of readings and their limits
- detailed status screen for troubleshooting
- integrated manual
The RMU1PGM BT interface is always in a Bluetooth pairing mode and requires a pairing code entered on the app. The pairing code (default=123456) can be changed with the app. Once paired, the Android device can reconnect without needing to re-enter the code.
Last updated on 09/04/2021
Updated firmware
- RMU1PGM v1.03
- RMU123PGM v1.11
- RMU1ER v1.06
- Manual v102
Update firmware for RMU1ER
محمل
Jesse Newton
Android متطلبات النظام
Android 4.4+
الفئة
الإبلاغ
RMU1ER Config
1.0.4 by Mobiltex Data Ltd.
09/04/2021