We use cookies and other technologies on this website to enhance your user experience.
By clicking any link on this page you are giving your consent to our Privacy Policy and Cookies Policy.

Über IR Remote Test - IR Blaster Check

Überprüfen Sie Remote-IR-Fernbedienung Testen Sie, ob es funktioniert oder das eigentliche Problem erkennen

An IR Remote Tester Control sends out a signal using Infrared light. You cannot see this light with your eyes, but by using a camera app with filter you can see the signal.

To check if your IR Remote is sending a signal, follow the steps below:

Pick a device to use:

>Turn the IR Remote Tester app on.

>After open of the IR Remote Tester app.

>Point the end of the remote control with the IR emitter.

>Look at the viewfinder or LCD screen.

>Press and hold one of the buttons on the remote control.

>If the remote control is sending a signal, you should see a light in the viewfinder or cell phone screen when you press buttons on the remote control.

> If the transmitter is visible

The remote control is normal.

>If the transmitter is not visible

The battery is dead or the remote control may be damaged.

>Depending on whether the transmitter is visible or not, follow the instructions below:

If the light of the remote control transmitter is not visible when any button is pressed, there is a possibility the batteries are spent. Switch to new batteries and check whether or not the transmitter lights up.

>>NOTE: Insert a battery consistent with the + pole and - pole according to the indication.

If the symptoms do not improve, the remote control may be broken.

You can also test each of the buttons on the remote by pressing them one at a time and checking to see if you see a light from the emitter.

>>NOTE: If you see a light when no button is pressed, one of the buttons on the remote may be >stuck and preventing other buttons from working. If this is the case:

>Remove the batteries.\n

>Press and release each button a couple of times to see if you can free the stuck button.

>Replace the batteries and test the remote again.

>If you continue to see a light when no button is pressed, the remote control may need to be replaced.

>If it does not light up when its specific button is pressed, the button may be broken.

Feature :

remote tester

remote testing app

remote test

tv remote tester

ir remote tester

ir blaster check

Ir sensor check

Check ir remote control

test your remote control batteries

test your remote control batteries

test remote control

ir remote test

Share IR Remote Test app in your circle

Was ist neu in der neuesten Version 1.0

Last updated on May 28, 2018

Minor bug fixes and improvements. Install or update to the newest version to check it out!

Übersetzung wird geladen...

Zusätzliche APP Informationen

Aktuelle Version

IR Remote Test - IR Blaster Check Update anfordern 1.0

Von hochgeladen

Juampi Ramirez

Erforderliche Android-Version

Android 4.0.3+

Mehr anzeigen

IR Remote Test - IR Blaster Check Screenshots

Sprachen
Abonnieren Sie APKPure
Erhalten Sie als der Erste den Zugang zu Vorabversionen, Neuigkeiten und Anleitungen der besten Android-Spiele und -Apps.
Nein, danke
Anmeldung
Erfolgreich abonniert!
Sie haben jetzt APKPure abonniert.
Abonnieren Sie APKPure
Erhalten Sie als der Erste den Zugang zu Vorabversionen, Neuigkeiten und Anleitungen der besten Android-Spiele und -Apps.
Nein, danke
Anmeldung
Erfolg!
Sie sind jetzt unseren Newsletter abonniert.