Используйте приложение APKPure
Историческую версию TERPS можно получить на Android
Приложение сбрасывает датчик USB DPS8000 / 8100 до заводских настроек
The TERPS application resets a USB DPS8000/8100 sensor back to factory default settings and displays the pressure readings from the sensor. If the sensor is a barometric reference then avionics parameters (QFE, QNH, QFF, MSL Altitude) are also computed and displayed.
Application Notes:
This application requires authorization to access the USB port to read and write to a connected DPS8000/81000 sensor.
Reconnecting a previously authorized sensor will automatically launch the TERPS application.
Please try disconnecting and reconnecting the sensor in the event of a communication error.
Requirements:
1. Android Phone should be having OTG Support
2. This Application should be used with TERPS-8100 Air Pressure Series.
3. Google Play Services are required for correct functioning of Application
4. App should be installed and updated only via Google PlayStore
Загрузил
Trần Văn Thành
Требуемая версия Android
Android 4.4+
Категория
Используйте приложение APKPure
Историческую версию TERPS можно получить на Android
Используйте приложение APKPure
Историческую версию TERPS можно получить на Android